- 1pc regulator 1st stage Made in ITALY
- 2pcs air balanced regulator 2nd stage Made in ITALY
- 1pc high press hose 24 inch Made in ITALY
- 1pc pressure gauge Made in ITALY
- 1pc low press hose 30 inch, Made in USA
- 1pc low press hose 40 inch, Made in USA
- 1pc bolt snap
- 5 years warranty, after-sales service in North America(FL), Europe(Belgium), Asia-Pacific(Philippines)...
Package:
Diving Regulator first stage polished F3
-color: polished silver
-material: chrome plated brass body
-Air balanced flow-through piston design
-rotating swivel turret helps streamline hose distribution
-balanced piston design allows the use of lighter and more sensitive components, -resulting in ultra fast breathing response
- Green Teflon coated piston spring
- 316 stainless steel piston
-Cold water: above 10 degree
-Low pressure ports: 5 on swivel turret
-High pressure ports: 2
-Weight: : 780g
-Ventilation rate(1pm): 62 (mean)
- Intermediate Pressure: 135-145 PSI
-Connection: DIN 300 bar
-Recommended for recreational and technical diving
-Made in Italy
Diving Regulator 2nd stage FN2:
-Air balanced flow-through design
-Chrome plated inlet tube
-High comfort mouthpiece
-Air flow control knob and Venturi lever
-Intermediate Pressure: 145 PSI
-Cracking Effort: 1.2-1.8 CIW (Column inches of Water)
-WOB @ 50M: 0.7 J/L
-Flow rate: 60 SCFM (air supply: 3000 PSI)
-Weight: : 320g
Low press hose 30 inches:
- 30 Bar/435 psi leak tested
- Low pressure inflator hose 30 inches / 75 cm
- For regulator / Octopus 2nd stage
- Do not exceed 500 PSI
Yellow low pressure regulator hose 40 inches
- 30 Bar/435 psi leak tested
- Low pressure inflator hose 40 inches
- For regulator / Octopus 2nd stage
- Do not exceed 500 PSI, manufactured in Italy
High press hose 24 inches HS-HP24 :
- Pressure tested under CE EN250 requirements
- Working pressure: 5070 psi (350 bar)
- Burst pressure: 25000 psi (1750 bars)
- Complete with O-ring, corrosion resistant chrome plated brass fittings, manufactured in Italy
Pressure gauge PG002:
- Chrome plated marine grade brass
- Tempered glass lens
- Luminescent gauge face for easy reading in low light conditions
- Wide 270 degrees sweep from 0 to 300 bar
- Easy reading high-contrast black face
- Viton O-Rings included, manufactured in Italy
Bolt snap ezsnaps07:
- Marine grade 316 S/S, 2.75 inches / 7 cm
AKUANA regulators are designed to deliver effortless airflow in different environments and are undergoing rigorous tests to ensure the superb reliability which earns the trust of recreational, technical and military divers.
AKUANA also offers different regulator packages which can be used in different configurations. The pre set-up package saves divers a lot of trouble. Personalization is also a key feature which allows diver to design their own regulators. Divers can choose piston or diaphragm and a variety of colors.
OPEN WATER single tank set
Open water set regulators use classic downstream design and are trustworthy to all recreational divers. In order to lower the risk of entanglement, the open water set regulators use shorter primary second stage hose and high pressure hose.
